Skip to content

Healthcare

Endoscopy Center Waterford, CT

Waterford, CT

Outpatient Endoscopy & Clinic Fit-Out

Waterford, CT

Plumbing, HVAC, and medical gas fit-out for a new outpatient medical facility. A two-story fit-out of approximately 15,000 SF including licensed procedure rooms, clinical spaces, and support areas.

Sector
Healthcare
Location
Waterford, CT
Facility
Outpatient Endoscopy & Medical Office
Trades
HVAC, Plumbing, Medical Gas
Duration
Aug 2024 to May 2025
Size
~15,000 SF (two-story)

Project overview

BIM-coordinated installation with tight ceiling clearances and healthcare code compliance.

Scope by trade

Plumbing

  • Cast-iron waste and vent.
  • Type L copper domestic water.
  • Carbon-steel gas piping.
  • Electric water heaters with hot-water recirculation.
  • Fixtures.
  • Insulation.

HVAC

  • Ductwork and accessories.
  • VAV boxes.
  • Balancing dampers.
  • Exhaust fans.
  • Air-cooled condensers.
  • Insulation and controls per Division 23.

Medical gas

  • Oxygen, medical vacuum, and WAGD systems per NFPA 99 and ASSE 6010.
  • Duplex oil-less rotary-vane vacuum pump.
  • Duplex automatic oxygen cylinder manifolds.

Scope of work

  • Plumbing and medical gas piping.
  • Complete HVAC (ductwork, diffusers, controls).
  • VAV boxes, exhaust fans, condensers.
  • Insulation, TAB, and commissioning support.
  • Matterport and point-cloud modeling.
  • Leica iCON layout.
  • Weekly BIM model reviews.

Challenges and solutions

  • Matterport scan converted to a point-cloud model of existing conditions.
  • Leica iCON total station used to lay out underground utilities.
  • ASM acted as the BIM coordination gatekeeper for all trades.

Results

  • Passed Department of Public Health inspection and NFPA 99 testing on the first review.
  • Met the occupancy and licensing date.
  • Air and water balancing verified.
  • Completed May 2025 with no safety incidents.

Services performed on this project

Industry expertise

More on our work in healthcare facilities

See how ASM approaches mechanical scope for healthcare clients across Connecticut, including standards we build to, coordination expectations, and typical deliverables.

Visit the Healthcare industry page

Have a similar project in Connecticut?

Bring us in early. We'll value-engineer the install before drawings are final.

Request an Estimate

More Healthcare projects

Healthcare

Shaw's Cove Pediatric Specialty AC System Additions

ConnecticutHealthcare

Added cooling capacity for a pediatric specialty space with two wall-mounted AC units and a rooftop condensing unit. Included new refrigeration linesets, insulated copper drain piping, and temperature controls.

  • Commercial HVAC

Healthcare

Gaylord Hospital Imaging Rooms Duct Upgrades

Wallingford, CTHealthcare

Ductwork upgrades for renovations in two imaging rooms. Demolition of existing duct and accessories, new galvanized duct, four RGDs, duct insulation, duct cleaning, and TAB. Two phased mobilizations during normal hours.

  • Commercial HVAC
  • Sheetmetal Fabrication

Healthcare

UConn John Dempsey Hospital Wound Care Center Renovation

Farmington, CTHealthcare

Plumbing, HVAC, and medical gas systems for the Wound Care Center renovation. Demolition and reinstallation of domestic water, waste/vent, medical gas piping, galvanized ductwork, exhaust systems, hot water heating components, air devices, and insulation. New exhaust fans, reheat, louvers, and full TAB.

  • Plumbing & Piping
  • Commercial HVAC
  • Mechanical Systems
Call (860) 349-1644Request Estimate